Dayton Audio APA102BT 60 WPC Integrated Amplifier
The Dayton Audio APA102BT high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Bluetooth 4.2 with aptX, two line input sources, two-channels, and Class D topology make Dayton Audios APA102BT amplifier the heavyweight in its class. The APA102BT features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the APA102BT for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.
The APA102BT is rated at 80 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety. Rack ears are included.
Specifications: • Output power: 2 x 60 watts RMS into 8 ohms, 2 x 80 watts RMS into 4 ohms, 1 x 160 watts RMS into 8 ohms (minimum impedance) bridged mono • Bluetooth version: 4.2 with aptX • Total harmonic distortion: <1.0% @ 1 kHz • Signal to noise ratio: 88 dB, A-weighted • Frequency response: 10-30,000 Hz • Input sensitivity: 600 mV • Power: 120 VAC, 60 Hz, 200 watt maximum • Amplifier chip: TDA8950TH • Dimensions: 16.9" W x 7.65" D x 2.15" H.
|Unit of Measure||Each|
|Warranty - Parts||5 Years|
|Warranty - Labor||5 Years|
|Product Shipping Weight (lbs.)||6.2|
|Amplifier Type||Power Amplifiers|
|Power Output||2 x 60 watts RMS into 8 ohms
80 watts RMS into 4 ohms
|Power Output (RMS @ 70V) Range||--|
|Output Connectors||Stereo RCA x 1, Stereo Binding Posts x 4|
|Output Types||Stereo Line Outputs x 2, Powered Outputs x 4|
|Input Connectors||Stereo RCA x 2|
|Signal-to-Noise Ratio||88 dB A-weighted|
|THD @ Rated Power||<1.0% @ 1 kHz|
|Low Pass Adjustment||--|
|Frequency Response||10-30,000 Hz|
|Voltage Requirement||120 VAC, 60 Hz|
|Stand-by Power Rating||--|
|Special Features||Bluetooth version: 4.2 with aptX|