Elipson Legacy II 3220 Floorstanding Speakers

The Legacy II 3220 evolves the Legacy range with a modernized design, while retaining the acoustic performance of the Legacy. This 2.5-way, 3-driver floorstanding speaker combines two mid-bass drivers and an AMT tweeter, for a power output of 150 W RMS .

The two 165 mm (6.5") mid-bass drivers use a ceramic-coated aluminum diaphragm and vented voice coils. The AMT tweeter , with a radiating surface of 3680 mm², extends the frequency response up to 30 kHz (38 kHz at -5 dB).

The crossover is spread across two separate printed circuit boards, with cutoff frequencies at 200 Hz and 2800 Hz . The tweeter's 18 dB/octave high-pass filter incorporates impedance compensation. The upper mid-bass driver is filtered at 12 dB/octave with a parallel anti-resonant circuit, while the lower mid-bass driver is filtered at 6 dB/octave. The crossover uses 400 V MKP capacitors, metal oxide resistors, and low series resistance (DCR) inductors.

The column is constructed from 25mm high-density MDF , inclined at 3.5°. Four internal braces provide rigidity, two of which are tensioned with the magnetic assembly of the mid-bass drivers. The down-firing bass-reflex enclosure, tuned to 35 Hz, vents downwards. The base rests on three points, with height-adjustable spikes from 0 to 8 mm. The piano lacquer finish comprises 14 to 15 layers on average, for a thickness of 1.2 to 1.5 mm. Three finishes are available: Dark Walnut Lacquer , Light Walnut , and Black Lacquer.

Technical Details:

• Type: 2.5-way floorstanding speaker, 3 drivers, down-firing bass-reflex

• Power: 150 W RMS

• Speakers:

  • AMT tweeter, surface area 3680 mm²

  • 2 x 165 mm (6.5") mid-bass drivers, ceramic-coated aluminum cone, vented voice coils

• Frequency response: 35 Hz to 30 kHz (38 kHz at -5 dB)

• Sensitivity: 89 dB

• Nominal impedance: 6 Ω

• Minimum impedance: 6 Ω at 130 Hz

• Filter distributor:

  • Cutoff frequencies: 200 & 2800 Hz

  • Tweeter: 18 dB/oct. high-pass with impedance compensation

  • Upper mid-bass: 12 dB/octave with parallel anti-resonance circuit

  • Lower mid-bass: 6 dB/oct.

  • Printed circuit boards separated into 2 parts

• Filter components: MKP 400V capacitors, metal oxide resistors, low series resistance inductors (DCR)

• Bass-reflex tuning frequency: 35 Hz

• Cabinet: 25 mm high-density MDF, 3.5° incline, 4 internal reinforcements

• Base: 3 points, adjustable spikes in height from 0 to 8 mm

• Finish: Piano-type lacquer, 14-15 layers on average, 1.2 to 1.5 mm thick

• Colors: Dark lacquered walnut, Light walnut, Black lacquer

• Dimensions with base: W340 x H1100 x D545 mm

• Weight: 34 kg