Active Ground Block SX

 Sky high performance starts at ground.

*Includes 5ft Foundation SX 12awg Power Cord

*Includes (4) 4ft. and (2) 8ft. standard

*leads for Atmosphere SX Series cables & Pink Fuse

The new Active Ground Block SX is a technological trickle-down of our cost-no-object Galileo Active Ground Block plus new technologies that were not developed when we first engineered the Galileo Active Ground Block. First, we start with a Galileo-style chassis machined from a solid billet of aluminum plus carbon fiber to lower distortion related to mechanical vibration. Next, we developed a power supply with technology and lessons learned from our LPS or Linear Power Supply development program for the lowest noise floor of any Active Ground Block to date. We then dialed up the performance of our ULF bias of ground by introducing duel harmonics of the Schuman Resonance instead of just one with technology developed for our upcoming 2023 Galileo PowerCell. We also focused on making the new Active Ground Block SX more practical than the popular PowerCell SE by upping the number of ground points from 22 to 32. This means you can ground an additional ten components, cable shields, system racks, or anything in your system made from a conductive material to maximize system performance. Finally, audition the Active Ground Block SX in your system and discover why we say ultimate performance starts at ground level.

Applications

• Synergistic Research Galileo UEF and Atmosphere Cables
• Synergistic Research Tranquility Bases
• Synergistic Research Atmospheres
• Turntables – Standard or Small Spade Connect to Ground Post on Turntable
• Phono-stage - Standard or Small Spade Connect to Ground Post
• Digital to Analog Converters (DACs) – Connect to spare Digital Input, Output or Chassis Ground
• Reel to Reel Tape - Connect to spare Analog Input, Output or Chassis Ground
• Pre-Amplifiers – Connect to spare Analog Input, Output or Chassis Ground
• Power Amplifiers – Connect to spare Analog Input, Output or Chassis Ground.  Note:  Many power amplifiers will sound best without the ground engaged.  Try your power amp and speaker cables with and without the ground attached and choose what sounds best for your system.
• USB Devices – Connect to spare USB Input, Output or Chassis Ground
• Audio Computers - 3.5mm Headphone Jack
• Any Component with an active circuit inside – Connect to spare Input, Output or Chassis Ground

Active Ground Block SX specifications:

• Construction: Aircraft Aluminum
• Dimensions: Height 2.7″ x Width 10″ x Depth 6″
• Weight: 5.5 lbs.
• Internal Active UEF
• Connector Input:  1 each 15 amp IEC
• 99.995% Pure Silver Ground Strap: 52 square centimeters
• SR Quantum Capacitor
• Point-to-point wiring
• Silver Solder 4%
• Hand Built Time: 2.5 hours
• Quantum Tunneling: SRX
• 5 Day Burn In: 2 Step Process

Voltage and current Rating:

• Input rating US: 15amp/125v
• Input Rating International (EU/AU/UK): 16amp/250v

Connector Input :

• 32 each 2mm ground ports

UEF:

• Graphene treatment throughout unit
• Internal “Active” power supply for biasing EM Cells
• 4th generation Internal Gaileo Dual Frequency ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
• 1 each SR Power Transformers
• 1 each SR Quantum Capacitor in EM Cell power supply and ULF field generator

Connector Input:

• 1 each  15 amp IEC
• 1 each On/Off switch
• 1 each SR Purple 16A Fuse

99.995% Pure Silver

• 52 square centimeters

Available connections for other SR products with SR Ground Plane Technology:

• Synergistic Research Atmosphere: Acoustic Wave Generator
• Synergistic Research FEQ: Frequency Equalizer
• Synergistic Research Tranquility Base Products

Optional High-Def connectivity ground cables are available for the following applications:

• Turntables: Connect to Ground Plug on Turntable
• Digital to Analog Converters (DACs): Connect to spare Digital Input, Output or Chassis Ground
• Pre-Amplifiers: Connect to spare Analog Input, Output or Chassis Ground
• Power Amplifiers: Connect to spare Analog Input, Output or Chassis Ground.
• USB Devices: Connect to spare USB Input, Output or Chassis Ground
• Any Component with an active circuit inside: Connect to spare Input, Output or Chassis Ground