PowerCell 8 UEF SE
Shipping : FREE in Canada
Includes 5ft Atmosphere SX Level 2 AC Power Cable
American muscle.
The PowerCell 8 UEF SE gets a huge boost in performance over the non SE version through our ultra performance UEF Blue outlets and a highly conductive, 52 square centimeter, 99.995% pure Silver Ground Strap with Graphene and UEF Tech to condition ground in a similar manner as our award winning SR Ground Block. This pure silver UEF Ground Strap attaches to each of the PowerCell 8 UEF SE’s (4) UEF Blue Duplex’s delivering the cleanest possible ground for your components.
Powering the PowerCell 8 UEF SE is a custom engineered High Current Active Level 2 Atmosphere power cord featuring a built-in Swiss Made power supply for Active Shielding. And when you deliver cleaner power to your power conditioner through an included High Current Level 2 power cord, your PowerCell 8 UEF SE delivers cleaner power to your components for a system wide transformation that’s night and day over non and traditionally conditioned AC.
PowerCell 8 UEF SE specifications:
- Construction: Aircraft Aluminum
- Dimensions: Height 3″ x Width 10.75″ x Depth 6″
- Weight: 6.6 lbs.
- Internal Active UEF EM Perpendicular Plane Cell area: 387 square centimeters including
- Dielectric: PTFE
- Connector Input: 1 each 20 amp IEC
- Connector Output US: 8 UEF Blue Outlets (Two Stage Quantum Treated)
- Connector Output International (EU/AU/UK): 8 UEF Blue Schuko outlets (Two Stage Quantum Treated)
- 99.995% Pure Silver Ground Strap: 62 square centimeters
- Power Cable: Atmosphere Level 2 High Current PowerCell Power Cable
- 12 awg. Mil Spec Silver Matrix Multi-Stranded Wire
- Swiss-made “Active Power Supply”
- SR Quantum Capacitors
- Point-to-point wiring
- Silver Solder 4%
- Hand Built Time: 2.5 hours
- Quantum Tunneling: Standard Level 2
- 5 Day Burn In: 2 Step Process
Voltage and current Rating:
- Input rating US: 20amp/125v
- Input Rating International (EU/AU/UK): 16amp/250v
- US Version: Rating is limited by the US Outlet rating of 20amp/125v
- International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v
Atmosphere Level 2 PowerCell power cable
Make the connection.
Level 2 High Current A/C Specifications:
3 each 12 awg. Copper Matrix Alloy:
- Dielectric: Modified PE
- Shielding: Braided Ground Plane Technology
- Geometry: 2 channel
1 each 4th Gen-Tricon:
- Silver Copper Matrix: Mono-crystal conductors with a separate ground conductor from shield
- Dielectric: PTFE
- Shielding: Ground Plane Technology
- Geometry: Tri-axial
- Listened for signal direction before build
1 each Silver Air String:
- Silver Air Strings: 99.9999% pure mono-crystal Silver conductor
- Dielectric: PTFE Air (sealed)
- Shielding: Ground Plane Technology
- Hand crafted in our California factory
1 each Tungsten Air String:
- Silver Air Strings: 99.99% pure mono-crystal Tungsten conductor
- Dielectric: PTFE Air (sealed)
- Shielding: Ground Plane Technology
- Hand crafted in our California factory
1 each Active Shielding UEF Cell:
- Swiss-made DC bias Power Supply
- UEF: Graphene treated pcb
- SR Quantum Capacitors
- Dielectric: PTFE
- Shielding: Ground Plane Technology
- Housing: Carbon Fiber Cylinder
1 each Red Active Module:
- Optional for lowest noise floor, completes Active bias circuit
Build Notes:
- 26 point-to-point hand soldered connections
- Atmsophere UEF 3 Teatment: 2 different UEF coatings with Graphene are applied to Active S Cell, connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane and UEF Cell also benefit from dampening effect that UEF provides
- 1 Termination for Atmosphere Active Tuning Module (Red)
- Silver Solder: 4%
- Hand build time: 2.0 hours
- Quantum Tunneling: Before the Active power supply is incorporated all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that lets electrons to flow more freely. This allows the “Active Shielding” to work more efficiently yielding the maximum amount of low level information through the conductors and provides for the higher degree of realistic musical performance
- 5 day Burn-in: 2 step process
- Hand crafted in our California factory